Product Name: Positive PS(Pre-sensitized) offset printing plate

Brand Name: MYNCO

Thickness: 0.15-0.30mm

Laser Energy Required: 160-180mj/ cm

Spectral sensitivity: 3000w Iodine-Gallium Lamp, Distance: 1~1.2m, for a Duration of 55-60Senconds

Resolution: 2-98%@200lpi

Developer: MYNCO Developer

Developer Tempreture:23±2°C

Dwell Time:30±5Seconds

Plate Finisher: Suitable to Any PS Plate Finisher

Baking Conditions: 220°C-250°C for a Duration of 5-8 Minutes

Run Length: 50,000~80,000 Impressions Unbaked, 250,000~400,000 Impressions Post-baked. Actual Run Length May Vary According to Press, Ink and Paper Conditions

Shelf Life: 18Month Under Recommended Storage Conditions

Package: 50PCS/Carton. Available in All Standard Formats Including Bulk Packaging Options

Transport and Storage: Store Plates Flat at Normal Temperature with Relative Humidity Between 40% and 70%.

Characteristics of our PS plate:

1.Multiple graining layer with fine structure, high resolution and good tone reproduction.

2. Good sensitivity ,good developing latitude, good exposure ability and fine water receptivity.

3.Oxidation layer ensuring good water retaining and durability.

4. Gas leading layer reducing the time required for evacuation and preventing the formation of an indistinct image during printing.

Oxidation process makes the aluminum substrate hard and durable, which is greatly improve water retaining and durability of the plate.

Electrolytic process ensures that the graining cells of the plate are well distributed, the balance of water- ink reached rapidly and maintained in the printing.

Oxidation process makes the aluminum substrate hard and durable, which is greatly improve water retaining and durability of the plate.

Product Name: Positive thermal CTP offset printing plate

Brand Name: RECO & COTU

Gauge: 0.15-0.30mm

Spectral Sensitivity: 830nm

Photosensitivity: 130-150mJ/cm2

Resolution: 1-99%@250lpi

FM Capability: 20um stochastic

Processors: Any suitable processors for positive thermal CTP plates

Developer: Recommended to use RECO or Kodak Developer

Developing Temperature: 20-22centigrade

Developing Time: 20-25seconds

Replenishment Rate: 60-100ml/SQM

Safelight: Daylight handling

Run-length: 100,000impressions unbaked, over 200,000impressions post-baked. Actual run length may vary according to press, ink and paper conditions

Transport and Storage: Store Plates Flat at Normal Temperature with Relative Humidity Between 40% and 70%

Characteristics of our CTP plate:

1. No preheating, our positive thermal CTP plate with wide operation latitude for medium run sheet-fed, web-offset and packaging applications. 140P can be baked for over 500,000 impressions and UV ink applications.

2.The parameter and quality of our CTP plate is similar to CTP plate of Kodak EE（Electra Excel HR Thermal Plates）. It characteristics with high resolution, versatility and reliability, consistency both in AM and FM screening application, excellent ink-water balance, fast imaging speed, cost effective and good dot reproduction.

3. Plate: Electro-chemically grained, anodized lithographic–grade aluminum with hydrophilic treatment.

4. Produced under patents: US6, 124, 425, US6, 177 and 182, EP11614469, 200710045969.0, 200720074662.9 and other patents pending.

Product Name: Positive CTcP Plate or UV-CTP offset printing plate

Brand Name: MYNCO

Gauge: 0.15-0.30mm

Spectral Sensitivity: 405nm

Photosensitivity: 70-80mJ/cm2, for Basysprint and Lusher machine, 80mJ/cm2, for Cron machine, 65-80mJ/cm2

Resolution: 1-99%@200lpi

Developer: MYNCO Developer and suitable to Fuji Developer

Density of developer: The proporation of developer to water is 1:3.5

Developing Temperature: 25-30centigrade

Developing Time: 28-35Seconds

Safelight: Yellow

Shelf Life: 12months under recommended storage condition