Product characteristics

- Excellent consistent performance
- High sensitivity and high resolution
- Superior runability
- Wide developing Latitude
- Easy to use

Technical specifications

Type
Thermal Positive CTP plate

Substrate
Electro-chemically grained and anodized aluminum

Sensitivity
830nm

Laser Energy
120-140mJ/cm2

Resolution
1%-99% at 200lpi

Run Length
Unbaked over 50,000, Baked over 200,000
(Dependent upon capability of imaging device)

Shelf Life
A controlled environment of 65% RH and 10℃ ~ 30℃ for 12 months

Solid content: 8%-38%
Viscosity: 1.5-9c.p.s.
Color: Green and Blue
Exposure latent image: Decolouration-type
Strong developer: dilute ratio 1:4 of concentrated developer
Sensitivity: 60 - 90mJ/cm2
Coating thickness: 1.6 - 1.8g/m2
Reproduction: work on the plate setter, the clear point is 45mW and the reproduction of 50%dots is 47%.
Lipophilicity: Excellent, suitable for proof press and printing.
Diluting solvent: 2-Ethoxyethanol, PGME
Run-length: middle-runs
Storage and shelf life: cool(10℃-25℃), dark and dry place for 6 months

Solid content: 10%-38%
Viscosity: 1.5-90c.p.s.
Color: Green and Blue
Exposure latent image: Decolouration-type
Standard developer: 5% Na2SiO3. 9H2O
Sensitivity: 90 – 160 mJ/cm2
Contrast: (Fuji15 gray step guide) 6 – 7
Reproduction: 10 μm single lines and 2% - 98% dots reproduction
Developing latitude: 2% Na2SiO3 – 6% Na2SiO3 + 6‰ NaOH
Alkali resistance: Immersed in 3% Na2SiO3 + 4‰ NaOH for 2 minutes, the losing of film is lower than 10%
IPA resistance: Immersed in 25% IPA for 2 hours, little losing of the film
Lipophilicity: Excellent, suitable for proof press and printing.
Diluting solvent: 2-Ethoxyethanol, PGME
Run-length: Long-runs
Storage and shelf life: cool(10℃-25℃), dark and dry place for 6 months
(We provide customized liquid according to required viscosity, dry content, sensitivity and so on)

Viscosity: 1.3-10 c.p.
Solid content: 8-15%
Coating thickness gauge: 1.55-1.65g/m2 (On the chemically well-treated Al substrate)
Sensitivity: 830nm laser CTP Platesetter, 120-140mJ/cm
Packging: Black PP or PE plastic barrels, 20kg
Coating performance: good for different coating technics, non-blue or non-white defect
Coating temperature: 20-30 degree.
Developing conditions: Developing temperature: 23℃-28℃,time: 25-35 seconds. Newly produced developer can be used for 30-35 seconds at 23℃.With the aging of developer, developing temperature should be raised, but better not extend developing time. For newly produced developer, it can have shorter developing time with higher temperature, such as 25℃ for 30 seconds, but better not higher than 30℃.
Shelf life: 6 months
Storage and handling: Liquid should be sealed stored at 5-25 degree, far away frrom heat and fire.