Technical specifications

• Reel diameter : 1270 / 1500 / 1850 / 2150 mm
• Reel width : up to 3000 mm
• Working and splicing speed : up to 1000 m/min
• Material : Film - Paper - Cardboard - Complexes up to 500 gsm

Process

• Coating / Laminating
• Paper printing

Basis equipments

• Overlap splice
• Reel taking with concentrically expanding chucks for cores of 6 inch. id.
• Motorized reel loading directly up from floor
• One unwind directionMotorized reel braking by AC motor
• Dancing roller assembly for web tension regulation

Options

• Second web unwinding direction
• Automatic release of the splice at a pre-set reel diameter
• Analogical modemothers (according to the application)

Technical specifications

• Reel diameter : 1850 mmReel width : 520 / 670 / 760 / 850 mm
• Working and splicing speed : 250 m/min (350-400 m/min)
• Material : Paper - Cardboard up to 500 gsm (700 gsm)

Process

• Liquid Packaging
• Folding board
• Cigarettes ...

Basis equipments

• Butt to butt angle splice
• Cantilever pneumatic expanding shafts for cores of 12 inch. id.
• Reel loading directly from the floor with manual lateral movement
• Two unwind directions
• Motorized reel braking by AC motorFestoon with pneumatic jack for the web tension control

Options

• Motorized festoon
• Idle rollers with at least a diameter of 200 mm
• Automatic release of the splice at a pre-set rest web length on the core (min. 5 m)
• Splicing in register
• Flange fitted pneumatic expanding shafts
• Additional shafts for cores id. of 150 mm or 6 inch. ; 300 mm ...Analogical modemothers (according to the application)

Technical specifications

• Reel diameter : 600 / 800 / 1000 mm
• Reel width : from 500 to 1000 mm
• Working and splicing speed : 350 m/min (450 m/min)
• Material : Paper - Paperboard - Complexes up to 250 gsm, Film - Foil from 12 microns

Process

• Paper printing
• WallpaperLabel & tag

Basis equipments

• Axial rewinding
• Pneumatic expanding shafts for cores of 70 mm or 3 inch.
• Integrated reel unloading device
• One rewind direction

Options

• Lay-on rollers on each rewind station
• Driven pressure roller
• Second rewinding direction
• Automatic splice release according to a pre-set diameter or amount of meters
• Integrated pulling device
• Additional airshafts for cores id. of 150 mm or 6 inch.
• Slitting device
• Analogical modemothers (according to the application)