JC Model Combination dryers has been designed as compatible with screen printing machines at different dimensions and brand as be able to be fixed to output of printing machine.

General Properties

• UV lamp unit is cooled by a high performance air-cooler has special air flow channels.
• Owing to have a special designed aluminum reflector, it has infrared (heat) absorption and efficiency of UV energy at maximum.
• 50-200 cm wide for printing and curing.
• Fast and easy replacing of UV lamp.Electrical heating elements and closed hot air circulation on each module for homogeneity and energy save.
• PID control for fine temperature adjustment.
• Step control or stepless liner (optional) power unit.
• Frequency control unit by Manuel or automatic conveyor speed adjustment by connected to printing machine.
• In case of stopping of line, the lamp unit rises up pneumatically to protect the surface and teflon conveyor belt from heat.
• Separate cooling fan for each lamps and vacuum fan are for base cooling.
• Electrical control panel is well connected with machine to form a compact design and easy maintenance.
• Isolated machine body for energy save and operator safetyIsolated machine body for energy save and operator safety.
• Optional quartz heat filter, PLC and touch screen.

CSA Model UV Curing Systems has been designed as compatible with all flexo, offset and letterpress printing machines works from roll to roll at different dimensions and properties. They can be fixed behind to each color unit or output of last color unit.

General Properties

• UV lamp unit is cooled by a high performance air-cooler has special air flow channels.
• Wide of curing between 45 and 65 cm.
• Owing to have a special designed aluminum reflector, it has infrared (heat) absorption and efficiency of UV energy at maximum.
• Automatic shutter system to close reflector unit in case of power.
• Fast and easy replacing of UV lamp.
• Automatic adjustment of fan speed due to changing of lamp working power.
• Automatic stepless adjustment of lamp power due to the speed of printing machine.
• Touch screen control interface.
• Dichroic-cold reflector and quartz filter as optional.

DSW Model Water-cooled UV Curing system has been designed as compatible with roll to roll flexo and web-offset printing machines at different dimensions and brand. They can be fixed behind to each color unit or output of last color unit.

General Properties

• The cooling of UV lamp unit has been provided by water circulation. The suction of ozone gas and excess of from UV lamp has been controlled by a special high performance air flow. By this mean, the possible deformation due to high temperature on surface is removed.
• Printing and curing wide is 60-220 cm.
• The lamp power is between 160-200 W/cm.
• Owing to have a special designed aluminum reflector, it has infrared (heat) absorption and efficiency of UV energy at maximum.
• Automatic shutter system to close reflector unit in case of power.
• Fast and easy replacing of UV lamp.
• Automatic adjustment of fan speed due to changing of lamp working power.
• Automatic stepless adjustment of lamp power due to the speed of printing machine.
• Touch screen control interface.
• Dichroic-cold reflector and quartz filter as optional.

EOA Model UV Curing Systems has been designed as compatible with offset printing machines works at different dimensions and properties. They can be fixed behind to each color unit or output of last color unit.

General Properties

• UV lamp unit is cooled by a high performance air-cooler has special air flow channels.
• Wide of curing between 60 and 160 cm.
• Owing to have a special designed aluminum reflector, it has infrared (heat) absorption and efficiency of UV energy at maximum.
• Automatic shutter system to close reflector unit in case of power.
• Fast and easy replacing of UV lamp.
• Automatic adjustment of fan speed due to changing of lamp working power.
• Automatic stepless adjustment of lamp power due to the speed of printing machine.
• Touch screen control interface.
• Dichroic-cold reflector and quartz filter as optional.

EOC Model UVmax curing systems has been designed as compatible with offset printing machines at different dimensions and brand as be able to be fixed to output of printing machine.

General Properties

• UV lamp unit is cooled by a high performance air-cooler has special air flow channels.
• Between 50-100 cm wide for printing and curing.
• Owing to have a special designed aluminum reflector, it has infrared (heat) absorption and efficiency of UV energy at maximum.
• Fast and easy replacing of UV lamp.
• Frequency control unit by Manuel conveyor speed adjustment by connected to printing machine.
• In case of stopping of line, the lamp unit rises up pneumatically to protect the surface and polyester conveyor belt from heat.
• One cooling fan for 2 lamps and vacuum fan are for base cooling.
• Electrical control panel is well connected with machine to form a compact design and easy maintenance.

FSA Model UV Curing Systems has been designed as compatible with all flexo, offset and letterpress printing machines works from roll to roll at different dimensions and properties. They can be fixed behind to each color unit or output of last color unit.

General Properties

• UV lamp unit is cooled by a high performance air-cooler has special air flow channels.
• Easy mounting system on many printing machine owing to have a lamp with 100mm wide.
• Wide of curing between 10 and 45 cm.
• Owing to have a special designed aluminum reflector, it has infrared (heat) absorption and efficiency of UV energy at maximum.
• Automatic shutter system to close reflector unit in case of power.
• Fast and easy replacing of UV lamp
• Automatic adjustment of fan speed due to changing of lamp working power.
• Automatic stepless adjustment of lamp power due to the speed of printing machine.
• Touch screen control interface.
• Dichroic-cold reflector and quartz filter as optional.

Offset printing is a commonly used printing technique in which the inked image is transferred (or “offset”) from a plate to a rubber blanket, then to the printing surface. UV offset inks have a variety of great benefits to offer starting with its quick turnaround time on tasks due to its fast drying abilities and its lack of damaging emissions. Offset printing is used in print tasks where large volumes or printing needs to be done at a cost effective rate and with very little maintenance. This type of printing is most often used for printing newspaper, books, brochures and stationary as it produces a high image quality.

Morecure UV Foil Offset Ink is suitable for printing on roll to roll press and sheet-fed offset machine. They are very good adhesion to pre-treated foil material like PP, PE and PVC. The strong covering properties are one of important points for the user to choose Morecure UV Offset ink.

UV curing offset ink designed for continuous printing on sheetfed paper and board. It is characterized for its high color intensity, high gloss and an excellent definition and contrast. Furthermore it has a great rub resistant as well as really good printing properties and chemical resistances.

This type of Morecure UV Offset Ink is one of the best choice for the sheet-fed paper and board printing by optimal curing properties on web printing. UV paper offset ink can be work on conventional ink roller, too.

UV finishing systems utilize clean curing technologies that provide significant savings compared to thermal curing. VOC and HAP emissions are virtually eliminated. In addition UV curing occurs in a fraction of a second, as compared to thermal curing which can take over 20 minutes and utilize a large footprint. The completed UV finish also provides superior resistance to scratches and chemicals. UV-TEK offers a large range of high quality UV based finish systems. İn operation, our treatment systems are designed to provide optimal adhesion to the PVC at the highest levels of wear and scratch resistance.

Morecure UV Wood Finish and Industrial varnish have high scratch resistance and durable to hard conditions. UV-Tek can service for wood finish application for three different types of UV Varnish to user as Primer, Sealer and Topcoat on different usage area of door, parquet, wood panel, mdf and cheap board. And also can service very good alternative product to user of pre-treated PVC panel with Morecure Brand industrial UV Varnish.

By the thixotrophy behavior, it can be used for filling the crack and be cured very fast than other 2-pack system without any settlement. Their stiffness can be adjusted due to the customer request for even liquid or gel either as adhesive for the net to marble or filler for the cracks.

By using the Morecure UV Marble Filler, the users save time importantly without waiting for curing of 2 pack systems. Additionally very good deep curing capabilities and faster curing rate than other brand, many user of marble surface industry prefer the Morecure brand. One of our strong assets is also color matching of light colors of users’ marble precisely.

On last years, the usage of UV varnish on printing industry has been raised enormously. OPV isn’t used only to create effect but also to make the printed material more resistant and durable. It can be process by different type of printing technic. Main of them is flexo, offset and screen printing.

During many years, Over Print Varnishes is produced with a good manufacturing process and experience of industry by UV-TEK. They are three main groups for the printing houses and can high gloss or matt effect as major. Finding alternative solutions fast for the users’ demand and special jobs, Morecure brand can be ahead one step more than other brands.

Flekso UV Varnish

It cures quickly to give a high gloss coating with good slip and rub resistance on a wide range of substrates. Its low odor once cured makes it suitable for labels and packaging applications. It can be applied by roller coating or flexo printing unit.

Offset UV Varnish

It can be printed from ink duct or water duct of offset printing machine. It can be choose by user whatever their system is capable. High gloss and resistant film properties can be gained even higher machine speed.

Screen Printing UV Varnish

It is for favorable for the special and partial varnishing jobs. Its high slip properties are suitable for double-side covering and prevent from blocking because of natural high film thickness to other printing system. The higher viscosity version of this type varnish can be used on emboss or other special effect.